SR10A-X3

SR10A-X3 MIL-STD Video Frame Grabber Fanless Computer with Intel i7-7820EQ ,  9V~36V DC-IN, Extended Temp. -40°C to 60°C

 

  • Intel® Core™ i7-7820EQ, 3.0/3.7 GHz, 4C, 8T, 8MB Cache, TDP 45W
  • DDR4 Up to 32GB, mSATA SSD Up to 1TB
  • HD-SDI Video Frame Grabber for Mini PCI Express
  • 8x Video Frame Grabber for mini PCI Express
  • Multi-Displays by 2x DP, 1x DVI-I
  • 2x PCIe Intel® Gigabit Ethernet
  • 4x USB 3.0, 1x COM ports (RS232/422/485)
  • 9V~36V DC-IN
  • Extended Temperature -40°C to 60°C
  • Optional unique accessory bumper design for vibration resistance

Intel Gold

Technical Profile

Introduction

The SR10A-X3 based on Intel® Haswell QM175 chipset, is powered by Intel® 7th generation Core™ processor onboard. The SR10A-X3 can operate effectively in harsh environment under temp range from -40°C to 60°C and is a perfect solution for military, transportation, factory automation and digital signage applications. SR10A-X3 is based on EBX form factor, DDR4 up to 32GB. It supports triple-display, 2 DP and 1 DVI-I, 2 GIGA LAN port, 4 USB 3.0 and 1 COM port. SR10A-X3 supplies wide power voltage from 9V to 36V DC-in.

SR10A-X3

 

Frame Grabber Card (Analog to Digital / PAL )

Frame grabbers may be used in military applications. For instance, when a potential breach of abnormal signal is detected, a frame grabber captures an image or a sequence of images in digital form, and then transmits the data to pilots or command control center.  SR10A-X3 support frame grabber cards expansion to be better process data promptly to meet front line needs, to collect useful images and help pilots to react promptly on the ever-changing battlefield.

 

Digital HD-SDI video input

1CH, Mini PCIe HW encode video capture card

 

AMP nanoVTV-EXT_0_2.png

 

Analogic PAL video input

4CH, Mini PCIe Video Capture Card

 

C351W_1_2_1.png

 

Analogic PAL video output

1CH, Scan Converter Board

 

CM313B_3_0_0.png

 

Unique Challenge

 

http://7starlake.dev.zhelang.com.tw/sites/default/files/inline-images/NEW_STYLE_products_SR10A_03.jpg

MIL-STD-810G standard designed for shock and vibration

SR10 is designed to meet MIL-STD-810G standard for shock and vibration. MIL-STD-810G standard is considered the upmost principle, which guarantees the system achieves superior quality and stability when operate under extreme harsh environment. We have conducted the test with series of testing procedures for resistance to shock, vibration, dust, humidity, and extreme temperatures. What’s more to make the system more rugged is SR10A designed with EBX form factor and stackable ability. With those two features can provide maximum exceeding solidity when stacking together to prevent loose from vibration. With key components- CPU and SSD soldering on board to enhance the capability of shock and vibration. With optional Bumper design, the level of vibration resistance increased.

Wire Rope Vibration Isolator Design for Higher Vibration Resistance

7starlake has especially design a Wire Rope Vibration Isolator for SR10A. The Wire Rope Vibration Isolator may sustain higher vibration resistance of the product itself. 

A Wire Rope Vibration Isolator is widely apply on supporting Military equipment because it may absorb and protect the object from vibration damage in any axes simultaneously, with the protection it may extended the product life operating under long hour vibration environment and vibration shock. The isolator is long life maintenance free tool and it may unload whenever required. Besides, Wipe Rope Vibration Isolators may survive under extreme temperature, corrosion, radioactivity, extreme dry or high humidity and UV Radiation environment.

Specifications

Operating Temp.

 

-40°C to 60°C
 

System

CPUCore i7-7820EQ, 3.0/3.7 GHz, 4C, 8T, 8M Cache, TDP 45W
ChipsetIntel® QM175 Chipset
Memory TypeDDR4 Up to 32GB SO-DIMM
Ethernet Chipset2x RJ45 Intel® I210IT & i217LM GbE
 

Front I/O

Power Button1x
LED1x Power, 1x HDD, 1x LAN
USB2x USB 3.0
POWER1x Terminal Block
 

Rear I/O

Display Port2x
DVI-I1x  DVI-I
Ethernet2x RJ45 ports
COM1x RS232/422/485
USB2x USB 3.0
 

Display

Display Interface2x DP
DVI-I1x DVI-I
 

Mechanical and Environment

Power Requirement9V~36V DC-IN, AT/ATX mode with power delay on/off
Dimension262 x 149 x 69 mm
Weight4.11 Kg(9.04 lbs)
Operating Temp.-40°C to 60°C (ambient with airflow)
Storage Temp.-40°C to 85°C
Relative Humidity5% to 95%, non-condensing
 

Test Standard

MIL-STD-810 Test
 

Operating Tests

Low TemperatureMethod 502.4 Procedure 2-20°C (Cold Boot) -40°C (Continue Operating)
High TemperatureMethod 501.4 Procedure 2+55°C
HumidityMethod 507.45 x 48 hour cycles
VibrationMethod 514.5 Category 410—500Hz 1.04Grms
ShockMethod 516.540G 11mSec TPS 3 axis
AltitudeMethod 500.5 Procedure 2-1,000m to +12,000m
 

Non-Operating Tests

ShockMethod 516.540G 11ms TPS 3 axis
Low Temperature StorageMethod 501.4-40°C
High Temperature StorageMethod 502.4 Procedure 1+75°C
VibrationMethod 514.5 Category 24 fig 514.5C-1720 to 1000Hz @ 0.02g²/Hz falling @ -6dB to 2000Hz
AltitudeMethod 500.5 Procedure 2-1,000m to +12,000m
EMCCE and FCC certificated
Green ProductRoHS, WEEE compliance

CPU

The rugged MIL-STD compliant system, SR10A-X3 is equipped with highly effectively heat conductive and heat convective thermal solutions to meet extended temperature requirements. The heat conductive solutions uses an aluminum flat mass to place in direct contact with the processor and chipset, the heat from chips then transfers it to the case of the system via 8.0 mm copper heat pipes. In addition, the convective thermal solutions introduce airflow directed to move across the surface of a fin style heatsink placed on top of the processor and chipset. This can be done with the aid of an appropriately sized fan placed in top of the fin style heatsink. Alternately, enclosure airflow can be routed to flow across a fin style heatsink.

 

SR10A

Device ModelSR10A-X3
TesterIan Huang
Test ResultPass
Test TemperatureHigh 0°C~70°C / Low -40°C~0°C
Test Time8Hours / 3Hours
Test StandardReference IEC60068-2
Test SoftwareBurnin test v7.1、
Crystal DiskMARK3.03,
Intel Extreme Tuning Utility1
CriteriaAfter testing, system can’t halt.

 

Test Standard

 

Device

Configuration

CPUIntel® Core i7-7820EQ 3.0GHz
PCHMobile Intel QM175 Express Chipset
MemorySwissbit SO-DIMM 4 GB DDR4-1600
port3 SATAIIInnodisk 3ME3 mSATA 64GB
port4 SATA IIApacer 64GB Onboard SSD
LAN1Intel(R) I210 Gigabit Network Connection
LAN2Intel(R) I217-LM Ethernet Connection
Test SoftwareBurnin test v6.0、AS SSD Benchmark
Intel Extreme Tuning Utility 4.3.0.11
ChamberKSON THS-b4t-150 Chipeng SMO-3

 

Thermal Measurement

 

The rugged MIL-STD compliant system, SR10A-X3 is equipped with highly effectively heat conductive and heat convective thermal solutions to meet extended temperature requirements. The heat conductive solutions uses an aluminum flat mass to place in direct contact with the processor and chipset, the heat from chips then transfers it to the case of the system via 8.0 mm copper heat pipes. In addition, the convective thermal solutions introduce airflow directed to move across the surface of a fin style heatsink placed on top of the processor and chipset. This can be done with the aid of an appropriately sized fan placed in top of the fin style heatsink. Alternately, enclosure airflow can be routed to flow across a fin style heatsink.

 

SR10A-X3  IO Performance

 

Point-40°C-20°C25°C40°C45°C50°C55°C60°C65°C70°C
CPU T-J22098100100100100100100100
CPU Die-9.78.581.584.292.193.595.597.397.7100.6
Heatsink-33.7-16.261.364.369.472.476.279.883.587.2
Δ1=(TJ-Die)11.711.516.515.87.96.54.52.72.3-0.6
Δ2=(Die-Sink)2424.720.219.922.721.119.317.514.213.4
CPU Frenquency (GHz)2.792.792.692.592.492.192.001.701.200.90

Thermal Solution

Effective cooling solution for maximum heat dissipation:

7starlake implements unique cooling solution with copper heat spreader, pure copper heat pipe and aluminum heat sink for maximum heat dissipation. With the aluminum heat sink enclosure allows dual-sided heat dissipation. We especially adopt the physical property of copper and aluminum, the copper heat spreader touches the heat source – processor and chipset and absorbs the heat rapidly, the heat then transfer to heat pipe; heat pipe is two-phase heat transfer involves the liquid-vapor phase change of a working fluid, the aluminum heat sink dissipates the heat into surrounding air promptly. With the benefits of fanless design, SR10A-X3 can ensure high reliability and stability while working under wide range temperature from -40°C to 60°C

http://7starlake.dev.zhelang.com.tw/sites/default/files/inline-images/NEW_STYLE_products_SR10A_Thermal01_0.jpg

Patent Designed Aluminum Heat Sink

The heat sink is made by heat radiating material, which is aim to lowering the temperature by dissipating heat into the surrounding air. 96 % of aluminum, 21 mm height and weighs 1039 g

 

Pure Copper Heat Pipe

The heat pipes are embedded in the heat sink to ensure 100% tight integration for superior heat dissipation. Especially adopts U shape copper heat pipe to fulfill utmost thermal conductivity, copper heat pipe transfers heat from the heat sources (e.g. CPU, chipset) to the heat sink over relatively long distance. Two-phase heat transfer involves the liquid-vapor phase change of a working fluid.

• 8.0 mm diameter heat pipe, 225 mm length of each heat pipe, 99.9% purity of copper
• High heat conductivity coefficient up to 5000

 

Copper Heat spreader

Copper heat spreader directly touches the power source area, which can absorb heat rapidly and transfer to heat pipe and allow the high efficiency heat pipe further bring out heat to upper heat sink enclosure

• 99.9% purity of copper, weigh 470 g

 

Wire Rope Vibration Isolator design may sustain higher vibration resistance of the product itself.

• 10Grms Vibration and 75Grms Vibration Shock proof with Wipe Rope Vibration Isolator.

Download

AttachmentSize
SR10_Shock_Test_3.pdf (1.19 MB)1.19 MB
SR10_Vibration_Test_3.pdf (1.19 MB)1.19 MB